Jeep Wrangler Snorkel Installation

Installing a snorkel on a Jeep Wrangler improves its off-roading capabilities and prevents water damage to the engine. However, it is important to carefully follow the installation instructions to ensure proper fitment and functionality.

A snorkel allows the vehicle to draw air from a higher location, reducing the risk of water entering the engine during river crossings or extreme off-road conditions. With the snorkel installed, Jeep Wrangler owners can confidently take their vehicle on adventures without worrying about damaging their engine.

We will discuss the steps involved in installing a snorkel on a Jeep Wrangler and the benefits it provides for off-road enthusiasts.

Jeep Wrangler Snorkel Installation


Why Install A Snorkel On A Jeep Wrangler

Installing a snorkel on a Jeep Wrangler enhances its off-road capabilities by allowing it to wade through deep water without damaging the engine. Experience the thrill of exploring rugged terrains and water crossings with confidence.

Snorkels are not just a cool accessory, but a practical addition that can significantly enhance your off-roading experience with a Jeep Wrangler. Installing a snorkel on your Jeep allows it to tackle challenging terrains, improve water fording ability, and even boost engine performance. With these benefits in mind, it’s no wonder why many Jeep enthusiasts opt for a snorkel installation.

Improved Water Fording Ability

When you’re out exploring muddy trails or crossing rivers, water ingress can cause severe damage to your Jeep’s engine and electrical components. This is where a snorkel comes in handy. A snorkel raises the air intake point of your Jeep’s engine to a higher position, ensuring that your engine breathes clean air even when submerged in water. It serves as a sort of breathing tube, allowing your engine to stay dry while confidently maneuvering through water crossings. Installing a snorkel on your Jeep Wrangler also minimizes the risk of hydrolocking, a situation where water enters the cylinders and causes the engine to seize. By increasing the air intake height, a snorkel reduces the chances of water entering the engine, giving you peace of mind during wet off-road adventures.

Increased Engine Performance

Apart from protecting your engine from water damage, a snorkel installation can actually improve the performance of your Jeep Wrangler. By bringing in cooler and cleaner air from a higher position, a snorkel increases the volume of air entering the engine. This allows for better combustion efficiency, resulting in improved horsepower and torque. When driving on dusty trails, a snorkel can also prevent dust and debris from clogging your air filter. This helps maintain optimal engine performance and prolongs the life of your air filter. With increased airflow and reduced intake restrictions, your Jeep Wrangler will have a more responsive throttle, allowing you to conquer obstacles with greater ease. In conclusion, installing a snorkel on your Jeep Wrangler not only enhances its aesthetics but also provides practical benefits for off-roading. Improved water fording ability and increased engine performance are just two compelling reasons to consider a snorkel installation. So, if you’re planning to take your Jeep Wrangler on exciting off-road adventures, a snorkel can be a worthwhile investment.

Choosing The Right Snorkel

When it comes to off-roading adventures with your Jeep Wrangler, having a good snorkel can make all the difference. A snorkel not only offers protection to your engine from water and dust but also improves its performance while driving through rough terrains. But with so many options available, choosing the right snorkel for your Jeep Wrangler can be a daunting task.

Compatibility With Jeep Wrangler Models

If you want to make sure that the snorkel you choose fits perfectly on your Jeep Wrangler, it is essential to consider its compatibility with different models. While some snorkels are designed to fit all Jeep Wrangler models, others might be specifically made for certain years and trims. Before making a purchase, check the specifications to ensure that the snorkel you are considering is compatible with your Jeep Wrangler version.

See also  Jeep Wrangler Brake Pad Replacement

Material And Design Considerations

Material and design are crucial aspects to consider when selecting a snorkel for your Jeep Wrangler. The snorkel should be made of durable materials such as UV-resistant polyethylene or strong stainless steel, which can withstand extreme weather conditions and off-road adventures without getting damaged. Additionally, the design of the snorkel should be aerodynamic, allowing smooth airflow and reducing any negative impact on your Jeep’s performance.

Moreover, look for a snorkel that comes with a built-in rain cap or pre-filter. This feature prevents water, dust, or other debris from entering your engine while driving through heavy rain or dusty trails. An easily detachable pre-filter will come in handy during maintenance and cleaning, ensuring the longevity of your snorkel and engine.

It is also essential to choose a snorkel that is straightforward to install. Look for one that comes with a complete installation kit and detailed instructions. This will save you time and effort, allowing you to quickly and securely mount the snorkel onto your Jeep Wrangler.

In conclusion, when choosing the right snorkel for your Jeep Wrangler, always consider its compatibility with your specific model, the material and design, as well as the ease of installation. These factors will ensure that you have a high-quality snorkel that not only protects your engine but also enhances your off-roading experience.

Tools And Materials Needed

Installing a snorkel kit on your Jeep Wrangler is a great way to increase its off-road capabilities and protect your engine from water damage. While the installation process may seem daunting, having the right tools and materials can make it a lot easier. In this section, we’ll discuss the essential items you’ll need to successfully install a snorkel kit on your Jeep Wrangler.

Snorkel Kit

The first and most important item you’ll need is a snorkel kit specifically designed for your Jeep Wrangler model. Snorkel kits typically include all the necessary components for installation, such as the snorkel body, mounting bracket, mounting hardware, and rubber seals. It’s crucial to choose a snorkel kit that is compatible with your Jeep Wrangler’s make and model to ensure a proper fit.

Basic Hand Tools

  • Screwdriver set
  • Socket wrench set
  • Adjustable wrench
  • Pliers (regular and needle-nose)
  • Allen wrench set
  • Torque wrench
  • Drill
  • Drill bits
  • Hacksaw
  • Measuring tape

Gather these basic hand tools before starting the installation process. They will help you remove the necessary parts on your Jeep Wrangler, such as the fender, air intake system, and inner fender liner. Additionally, having a torque wrench is essential for tightening the bolts to the manufacturer’s specifications.

Remember to always wear safety goggles and gloves while using these tools to protect yourself from any potential injuries.

Step-by-step Installation Process

Adding a snorkel to your Jeep Wrangler can be a game-changer, allowing you to conquer water crossings and dusty off-road trails with ease. Whether you’re a seasoned off-roader or simply looking to upgrade your Jeep, the installation process is straightforward. In this guide, we’ll take you through each step to help you install the snorkel on your Jeep Wrangler.

Preparation And Safety Measures

Before starting the installation process, it’s important to prepare yourself and your tools. Here are some key safety measures and preparations to keep in mind:

  • Gather all the necessary tools, including a screwdriver, pliers, an Allen wrench, and a utility knife.
  • Ensure you have a safe and well-ventilated workspace to work on your vehicle.
  • Park your Jeep on a level surface and engage the parking brake.
  • Wear protective gloves, safety glasses, and a dust mask to prevent any accidents.
See also  Jeep Wrangler Bumper Upgrade Ideas

Removing The Factory Air Intake System

The first step in installing a snorkel is to remove the factory air intake system. Follow these steps carefully:

  1. Open the hood of your Jeep and locate the air intake assembly.
  2. Disconnect the intake tube from the air filter housing using a screwdriver or pliers.
  3. Remove any clamps or fasteners securing the air filter housing in place.
  4. Gently pull out the entire factory air intake system, including the air filter housing.

Installing The Snorkel

Now that you have removed the factory air intake system, it’s time to install the snorkel. Follow the steps below:

  1. Take the snorkel kit and ensure you have all the necessary components.
  2. Position the snorkel body over the opening on the side of your Jeep’s fender.
  3. Secure the snorkel body in place using the provided mounting brackets and hardware.
  4. Tighten all the bolts and ensure the snorkel is firmly attached to your Jeep’s fender.

Routing The Snorkel Tube

With the snorkel body securely installed, it’s time to route the snorkel tube to the engine bay. Follow these steps:

  1. Connect the snorkel tube to the snorkel body using the provided connectors.
  2. Route the snorkel tube along the vehicle’s body, avoiding any obstacles or moving parts.
  3. Ensure the snorkel tube is securely fastened using zip ties or clamps.
  4. Double-check the routing to ensure the snorkel tube does not interfere with the hood or engine components.

Finalizing The Installation

After routing the snorkel tube, you’re almost done. Finalize the installation using the following steps:

  1. Inspect the entire installation to ensure all connections are tightened and secure.
  2. Double-check the position and alignment of the snorkel body and tube.
  3. Start your Jeep and let it idle for a few minutes to check for any air leaks or abnormalities.
  4. If everything looks and sounds good, take your Jeep for a test drive to enjoy your new snorkel!

By following this step-by-step installation process, you’ll have your snorkel securely installed on your Jeep Wrangler. Get ready to take your off-roading adventures to the next level with improved water-crossing abilities and better engine air intake!

Maintenance And Care Tips

Discover essential maintenance and care tips for your Jeep Wrangler snorkel installation. Keep your off-road adventures smooth and trouble-free with these effective and easy-to-follow guidelines.

Maintenance and Care Tips: Proper maintenance and care of your Jeep Wrangler snorkel are essential to ensure its longevity and optimal performance. By following these simple tips, you can keep your snorkel in excellent condition for all your off-roading adventures. Cleaning the Snorkel: To maintain the efficiency of your snorkel and prevent dirt and debris from clogging the air intake system, regular cleaning is necessary. Here’s how you can clean your Jeep Wrangler snorkel: 1. Rinse the exterior of the snorkel with water to remove any surface dirt or grime. Use a gentle stream of water to prevent any damage. 2. Prepare a gentle solution of mild soap and warm water. Dip a soft cloth or sponge into the solution and carefully clean the exterior surfaces of the snorkel.
See also  Jeep Comanche Bed Liner Options
3. Pay special attention to the snorkel head where it meets the roof or windshield. This area often accumulates dust and mud and requires thorough cleaning. 4. Rinse off the soap residue with clean water and allow the snorkel to air dry completely before reattaching it to your Jeep Wrangler. Inspection and Tightening of Connections: Regular inspection and tightening of connections are vital to ensure the snorkel remains securely attached to your Jeep Wrangler. Follow these steps: 1. Check all the fittings and connections of the snorkel periodically. Look for any signs of loose or damaged components. 2. If you notice any loose fittings, use the appropriate tools to tighten them securely. Be careful not to overtighten and risk damaging the snorkel or the vehicle. Periodic Replacement of Snorkel Filters: The snorkel filters play a crucial role in keeping dust and other contaminants out of your engine. Over time, these filters can become clogged and may require replacement. Here’s what you should do: 1. Refer to your owner’s manual or consult with a professional to determine the recommended replacement schedule for your snorkel filters. 2. When it’s time for replacement, remove the old filters and install new ones according to the manufacturer’s instructions. 3. Inspect the filters regularly for any signs of damage or excessive buildup. If you notice any issues, address them promptly to ensure the continued effectiveness of the snorkel. Remember, a clean and well-maintained snorkel contributes to the efficient performance of your Jeep Wrangler, allowing you to tackle challenging terrains with ease. By following these maintenance and care tips, you can enjoy the benefits of your snorkel for years to come.
Jeep Wrangler Snorkel Installation


Jeep Wrangler Snorkel Installation


Frequently Asked Questions For Jeep Wrangler Snorkel Installation

Is A Snorkel Worth It Jeep Wrangler?

Yes, a snorkel is worth it for a Jeep Wrangler. It helps prevent water damage to the engine when crossing deep water and allows for cleaner air intake during off-road activities. It is a recommended accessory for Jeep Wrangler owners.

What Is The Benefit Of A Snorkel On A Jeep?

A snorkel on a Jeep provides several benefits. It elevates the air intake point, preventing water and dust from entering the engine. This improves engine performance and protects it during water crossings. It also allows the Jeep to drive in deep water without damaging the engine.

How Deep Can A Jeep Wrangler Go In Water With A Snorkel?

A Jeep Wrangler with a snorkel can go into water up to its maximum wading depth, which is approximately 30 inches (76 centimeters). With a properly installed snorkel, the vehicle can ford through water without damaging the engine or other components.

How Do You Install A Snorkel?

To install a snorkel, follow these steps: 1. Choose a snorkel kit compatible with your vehicle. 2. Remove the airbox and fender. 3. Position the snorkel and mark the mounting holes. 4. Drill holes and attach the snorkel using provided hardware.

5. Reinstall the fender and airbox. Enjoy improved water wading capability and cleaner air intake.


A Jeep Wrangler snorkel installation is a worthwhile investment for any off-road enthusiast. Enhancing the vehicle’s performance and capability, the snorkel provides protection against water, dust, and debris, ensuring a smooth and worry-free drive even in challenging terrains. With its easy installation process and durable design, this accessory is a must-have for those seeking to elevate their Jeep experience.

Explore the world confidently with a snorkel-equipped Wrangler and embrace the thrill of off-roading.

Leave a Reply

Your email address will not be published. Required fields are marked *